A picture says a thousand words! Here I would post photos of new stuffs of mine that are in the pipeline for a review, but either I am still testing them, or yet to have time to write. Send me an e-mail for more questions on these products!
Hirobo metal head SZ-IV for Sceadu
Hirobo's new metal rotor head for Sceadu, the SZ-IV head. The SZ-IV head looks basically the same as the SZ-III head used in the Shuttle RG. However, only the yoke and the blade grips are from the SZ-III, the rotor hub, seesaw, mixing arms and the flybar brackets are all new items. My item is a prototype, but the final product should be much the same as mine. Set to officially debut in May 2002 Shizuoka Hobby Show, but you can see it here first. Check with your LOCAL Hirobo dealers for availability of this head, and check my Sceadu page later for my feelings to this nice rotor head.
|
 |
| Hirobo SZ-IV rotor head for Sceadu | Hirobo SZ-IV rotor head for Sceadu |
 |
 |
| Beefed up rotor hub with offset mounting | New seesaw and mixing arms |
 |
 |
| New flybar brackets | Use same sprindle shaft of Sceadu |
|
 |
| Hirobo 36 engine | The name says it all on the crankcase |
 |
 |
| Heatsink | Exhaust pattern same as OS32 |
 |
 |
| Carburetor venturi | Very beefy crankcase |
 |
|
| Backplate |